The righting arm, or GZ, is the horizontal distance between a vessel’s center of gravity and center of buoyancy when it heels. This lever helps explain the restoring force that brings a vessel upright; wind, waves, and changing buoyancy all shape that balance.

Multiple Choice

What is the righting arm (GZ)?

The righting arm, commonly referred to as GZ, is defined as the horizontal distance between the center of gravity (G) and the center of buoyancy (B) when a vessel is heeled over. This measurement is crucial for understanding a vessel's stability, as it represents the lever arm that acts to bring the vessel back to an upright position after being tilted by forces such as wind or waves. When a vessel is heeled, the center of buoyancy shifts, affecting the relationship between the center of gravity and the center of buoyancy. The longer the righting arm (GZ), the greater the force that acts to restore the vessel to an upright position, enhancing its stability. The other options discuss aspects of stability and buoyancy but do not accurately define the righting arm. The vertical distance from the keel to the waterline pertains to draft, while the distance from the center of buoyancy to the center of gravity when heeled refers more to the critical point of stability but not specifically to GZ. The angle of tilt, while related to stability, does not define the horizontal distance necessary for calculating the righting arm.

The Righting Arm: A Small Distance with a Big Job

A vessel heels when wind, waves, a turn, or shifting cargo pushes it away from upright. What matters next is whether the vessel tends to return—or keeps leaning. One key measure of that restoring ability is the righting arm, known in naval architecture as GZ. It’s a distance, but it represents a force at work: the vessel’s tendency to come back toward level.

Understanding GZ helps make sense of stability reports, loading decisions, and the way a vessel responds to rough water. It also offers a useful reminder: stability isn’t just about how heavy a ship is. It’s about how its weight and buoyancy act together.

First, picture the forces

A floating vessel is acted on by two main vertical forces. Gravity pulls down through the center of gravity, marked G. Buoyancy pushes up through the center of buoyancy, marked B—the center of the underwater volume that displaces water.

When a vessel is upright in calm water, these forces generally lie on the same vertical line. The downward force of the vessel’s weight and the upward force of buoyancy balance one another. There’s no turning moment from a sideways gap between them.

Now imagine a wave or gust makes the vessel heel. The shape of the underwater hull changes, so the center of buoyancy shifts. The center of gravity may also shift if people, liquid cargo, or equipment move, but for a fixed load it stays in much the same place relative to the vessel. The two vertical forces can then act along separate lines.

The righting arm GZ is the horizontal separation between those lines of action when the vessel is heeled. That separation gives the forces leverage. If the buoyancy force acts on the side that tends to lift the vessel back upright, the resulting moment is a righting moment.

Why a horizontal distance matters

It can be tempting to think of GZ as simply the distance from G to B. That isn’t quite right. GZ refers to the horizontal lever arm between the vertical lines through the centers of gravity and buoyancy—not the straight-line distance between the two points.

Why make that distinction? Because forces create a turning effect through their moment arm, the perpendicular distance from a force’s line of action to the point or line about which it turns. Here, gravity and buoyancy act vertically. Their horizontal separation is what gives them leverage to rotate the vessel.

A simple relationship captures the idea:

Righting moment = displacement × GZ

In this context, displacement is the vessel’s weight (or the equivalent buoyant force). The larger the GZ, the greater the restoring moment for the same displacement. A longer lever arm is like pushing a door farther from its hinges: the same push produces more turning effect.

That doesn’t mean the largest possible GZ is always the whole story. A vessel’s stability depends on how its righting arm changes across a range of heel angles, as well as on loading, freeboard, and the conditions at sea.

The first few degrees—and what changes later

At small heel angles, GZ is closely tied to a value called GM, or metacentric height. For a vessel in this range, the relationship is often written as:

GZ ≈ GM × sin(heel angle)

The angle must be expressed in the units used for the calculation. This approximation helps explain initial stability: when GM is positive, the vessel tends to develop a restoring arm as it heels slightly.

But GM doesn’t describe everything. As heel increases, the hull’s shape in the water matters more, and the relationship between angle and GZ becomes more complex. Naval architects and marine professionals use a GZ curve to show how the righting arm changes as the vessel heels through different angles.

That curve can reveal more than initial stiffness. It can show where GZ reaches its maximum, how far the vessel can heel while still producing a restoring moment, and the angle at which that restoring ability is lost. The area beneath parts of the curve also matters in stability analysis, because it reflects the vessel’s capacity to resist heeling over a range of angles.

A longer arm isn’t the only thing to watch

A strong initial righting response can feel reassuring. The vessel rolls back quickly after a small disturbance, and the motion may seem crisp. Yet “stiff” behavior can also mean a fast, uncomfortable roll. Conversely, a vessel with a gentler response may roll more slowly. Comfort and safety are related, but they aren’t the same measure.

Stability depends on more than the size of GZ at one particular angle. The vessel’s full righting-arm curve matters, along with its loading condition and the forces it may face. A vessel can have positive GZ at a modest heel and still face serious risks if it heels farther, takes on water, or loses freeboard.

Water entering through an opening can change the situation quickly. So can liquid moving across a tank. This is known as the free-surface effect: when liquid sloshes to the low side as the vessel heels, it can make the vessel behave as though its center of gravity has risen. That reduces effective stability and can weaken the righting response.

Cargo and gear matter, too. Heavy items placed high can raise the center of gravity; a raised G can reduce GM and affect GZ. Securing loads is important not only because loose objects are hazardous, but because shifting weight can alter the vessel’s balance at a critical moment.

GZ in real vessel operations

For a working vessel, stability is a moving picture, not a number carved in stone. Fuel is used, cargo is loaded or discharged, water may collect, and equipment can be moved. Each change can affect the vessel’s weight distribution or its underwater shape.

That’s why stability guidance considers a specific loading condition. The same vessel can have different stability characteristics when lightly loaded, carrying deck cargo, or operating with partly filled tanks. Operators rely on approved stability information and established procedures for the vessel, rather than assuming that a familiar hull will always respond the same way.

The surrounding conditions matter as well. Wind pressure on a high deckhouse or cargo can create a heeling moment. Waves can push and roll the vessel in ways that don’t match a calm-water calculation. GZ describes the vessel’s restoring leverage at a given heel; it doesn’t, by itself, predict every motion or guarantee safety in every sea state.

Still, the concept is powerful because it connects a vessel’s geometry to its response. The hull’s changing shape shifts buoyancy. That shift creates—or fails to create—a useful separation between the force lines. The resulting arm helps determine whether the vessel tends to right itself.

A clear way to remember it

Think of GZ as the horizontal lever arm that supports a restoring moment when a vessel heels. Gravity acts downward through G; buoyancy acts upward through B. If their vertical lines are separated in the right direction, the forces tend to rotate the vessel back toward upright.

The center of buoyancy’s movement is the key part of the story. As the vessel heels, the underwater shape changes, B shifts, and the relationship between the two forces changes with it. The righting arm measures the leverage created by that shift.

A distance can sound modest on paper. At sea, though, that distance helps explain a vessel’s response to wind, waves, and loading. GZ is not the whole story of stability—but it’s one of the clearest ways to see how buoyancy turns a heeling vessel toward home.